Authorized Dealer










Join our mailing list!





Instagram





You are here: Home > A3
Please Choose Catagory
8P (2006 - 2014) 8V (2015+)
Sort By:
Page of 3
Britewerks Prestige LED License Plate Light Housing for Audi A3/S3 8P Britewerks Premium LED Interior Light Kit for Audi A3/S3 AWE 2.0T TSI Boost Tap Hose
List Price: $59.00
Our Price: $33.99
Save $25.01!
List Price: $79.00
Our Price: $39.00
Save $40.00!
Our Price: $39.95
Tired of your trunk looking out-dated with the factory "yellowish" license plate lights?
Britewerks PRESTIGE LED license plate light housings give off that crisp, beautiful white color when you turn on your lights at night.

Made specifically for your Audi A3/S3 8P
Britewerks LEDs is your best solution to increase cabin brightness while creating a newer interior look.

Brighten up your interior with our Premium LED light kit.  These LED kits are specially designed to run cooler and output more light that your stock interior lights.  These vehicle specific light kits are all you need to replace all of your interior lights in your car.  Panel LEDs are the perfect size to fit into your interior light housing.

Made specifically for your Audi A3/S3
AWE's TSI Boost Hose is constructed of 5-Ply Silicone with Nomex Fibers. They chose to use Nomex Fibers in place of the standard polyester fibers because of Nomex's better strength and heat resistance.
Britewerks Prestige LED Interior Light Kit for Audi A3/S3 Forge Motorsports Blow Off Adapter for 1.4L, 1.8L, 2.0L Turbo Engines AWE Audi/VW Sport Pedals
List Price: $109.00
Our Price: $60.00
Save $49.00!
List Price: $90.00
Our Price: $89.00
Save $1.00!
List Price: $99.95
Our Price: $94.95
Save $5.00!
Britewerks LEDs are your best solution to increase cabin brightness while creating a newer interior look.

Brighten up your interior with Britewerks Prestige LED light kits.  These LED kits are specially designed to run cooler and output more light that your stock interior lights.  These vehicle specific light kits are all you need to replace all of your interior lights in your car.  

Britewerks Prestige LED light kits are made for consumers who want an even brighter interior when compared to our Premium light kits.  Prestige LED light kits utilize panel LEDs and are the perfect size to fit into your interior light housing.

Features - 
  • Brightest "vehicle specific" LED light kit in the market
  • White LEDs give a more modern look to your interior
  • Specially designed for your Audi A3/S3
  • 8x more light output than stock
  • Less power consumption than stock - stays on longer without draining your battery
  • Fade feature still enabled - lights fade in and out when vehicle is locked or unlocked
  • Won't turn off after 1 minutes like many of the low end LEDs in the market
  • Error Free

Kit Includes - 
  • 2x SMD LED Large Panel Front Dome Lights
  • 2x SMD BA9S Front and Rear Map Lights
  • 2x SMD LED 36mm Festoon Vanity Mirror Lights
  • 1x SMD LED Panel Glove Compartment Light
  • 2x SMD LED Panel Rear Map Lights
  • 1x  SMD LED Panel Trunk Light
  • NOTE -  A3 with NO sunroof requires an additional 2x SMD LED Large Panel Rear Dome Lights.  Please select this option from the drop-down menu above.
Applications - 
Vehicle - Audi A3/S3 8P
Year - 2006, 2007, 2008, 2009, 2010, 2011, 2012
With the introduction of the VAG TSi Turbo Engine, Forge have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Finally, an aluminum pedal cover set made specifically for Audi.
Agency Power Manual Boost Controller Audi A3 8P S3 Style Badgless Grille - Black AWE Audi/VW 2.0T Racing Diverter Valve
List Price: $120.00
Our Price: $105.00
Save $15.00!
List Price: $299.99
Our Price: $119.99
Save $180.00!
List Price: $129.95
Our Price: $123.45
Save $6.50!
Agency Power manual boost controllers are now available for your turbocharged vehicle! Thinking about updating the front end of your Audi A3? This badgeless grille is the perfect solution! The S3 style of this grille will make your A3 look sportier and more aggressive.

Specifications -
- Grille Color - Gloss Black
- Frame Color - Gloss Black
- Direct Fit
- More cost effective then OEM

Applications -
Vehicle - Audi A3 8P B
Year - 2003, 2004, 2005, 2006, 2007, 2008
Trim - All
Simple and elegant in its design, yet made for the most demanding of applications, this DV is a serious performer and has been extensively track, street, and dyno tested on multiple cars in multiple climates.
Agency Power Racing Diverter Valve Vogtland Audi A3 (8P) 3.2L V6 Lowering Springs Vogtland Audi A3 (8P) 2.0T Lowering Springs
List Price: $150.00
Our Price: $138.00
Sale Price: $135.00
Save $15.00!
List Price: $229.99
Our Price: $181.69
Save $48.30!
List Price: $229.99
Our Price: $181.69
Save $48.30!
Agency Power diverter valves are now available for your turbocharged Audi or VW. VOGTLAND performance lowering springs, manufactured in our plant in Germany,
provide multi faceted improvements for your vehicle suspension. Each spring is
calibrated for each vehicle. With lowering options from .75"-3.0" , you will…love to
drive!
VOGTLAND performance lowering springs, manufactured in our plant in Germany,
provide multi faceted improvements for your vehicle suspension. Each spring is
calibrated for each vehicle. With lowering options from .75"-3.0" , you will…love to
drive!
AWE Audi A3 8P Vent Boost Gauge Kit HPS Short Ram Intake System for Audi A3 8P 2.0TFSI Forge Diverter Valve for VW/Audi 2.0T Engines
Our Price: $199.00
List Price: $240.00
Our Price: $219.00
Save $21.00!
List Price: $240.00
Our Price: $239.00
Save $1.00!
From the originators of the vent mounted boost gauge comes AWE's latest masterpiece. After several design studies, they are pleased to offer the most visually integrated boost gauge available for the Audi A3. As a leader in aftermarket hoses and engine components, HPS delivers quality products at an affordable price. HPS short ram intake systems are an economical alternative to the HPS cold air systems and deliver performance, value and ease of installation. HPS short ram intakes are easy to install under the hood and cost less compared to the cold air intake systems. During the development process, certain applications respond favorably to shorter inlet lengths over longer cold air designs. For these applications, a short ram system is only offered. With the HPS in-house dyno, the engineers were able to find where to locate the filter in the coolest area of the engine compartment to deliver the best performance of the short ram air intake system.

Built for performance and show, the HPS short ram air intake kit offers a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. HPS short ram air intake systems have been tested on rear-wheel dynamo meter and shown to increase in horsepower and torque. Compared to the cold air intake, the HPS short ram air intake is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system.

The HPS short ram air intake systems are available in an assortment of powder coated colors and polished aluminum to match your engine bay styling. They come with a K&N high-flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard replacement filter that is limited to the size of the factory air box. The over-sized filter also captures more dirt increasing the service life before a cleaning is required (up to 100,000 miles).

HPS Short Ram Air Intake System Features:
  • Designed for increased performance for your sport compacts, utilizing the finest quality components
  • Proven by dyno to provide more horsepower and increased acceleration
  • Mandrel-bent aluminum tube piping for optimal air flow
  • Includes K&N high flow, washable/reusable air filter which is backed by a million mile warranty
  • Heat shield is included for maximum cooling effect
  • Bolt-on easy installation


Mandrel-Bent 6061 T6 Aluminum Alloy Piping with CNC Machined Mass Air Sensor Fittings



High Quality K&N Filter with T-Bolt Clamps and Silicone Hosing




Product Specifications:
Dyno Proven Performance Gains: +16.6 Whp, +15.5 Ft/lbs
Color: Polish/Wrinkle Black/Powder Coated Red/Powder Coated Blue
CARB Exempt: No
System Type: Shortram air intake system


Applications:

Vehicle - Audi A3 8P
Year - 2006, 2007, 2008
Engine - 2.0TFSI Turbo 4cyl


Disclaimer: HPS Performance intake systems are designed as racing, off-road, or show use only

This valve is for VAG vehicles equipped with the 2.0T FSI  or TFSi engines that have the electronically controlled bypass valves.
Injen Cold Air Intake System for Audi A3 2006-2008 B&G S2 A3 (8P) Sport Springs H&R Audi A3 Sport Springs
List Price: $353.43
Our Price: $241.75
Save $111.68!
List Price: $349.00
Our Price: $244.30
Save $104.70!
List Price: $369.00
Our Price: $253.18
Save $115.82!
Injen cold air intake systems dramatically increase throttle response while increasing horsepower and torque. With over 50 years of spring design and manufacturing expertise, our
S2 Sport Lowering Springs are engineered to improve handling while
maintaining safety and ride quality.
Looking for a quality spring without breaking the bank? Since the late 1970s, H&R has been dominating the aftermarket suspension industry by producing high quality products for your vehicle.
Injen Cold Air Intake System for Audi A3 2009-2010 Neuspeed RSE52 Light Weight Wheel - 18x8" Forge Blow Off Valve Kit for VW/Audi 2.0T Engines
List Price: $380.00
Our Price: $259.92
Save $120.08!
List Price: $299.95
Our Price: $262.46
Save $37.49!
List Price: $290.00
Our Price: $275.00
Save $15.00!
Injen cold air intake systems dramatically increase throttle response while increasing horsepower and torque.

As a leader in European performance parts and accessories, Neuspeed dedicates countless hours of research and design so the customer can be rest assured that every product they release is of the best qualilty.

Introducing the all new RSe52 light weight wheels, the street 18-inch version of the 17-inch RSe05. Carrying the same concept from NEUSPEED's other wheel line ups, the RSe52 features smooth and simple design lines giving the 'clean' and un-overbearing but yet complimentary to your European design Audi and Volkswagen vehicles.

Each RSe52 is spec-ed specifically for the assigned vehicle, which translates to complete direct bolt-on fitment utilizing factory lug bolts, center caps, as well as tire pressure monitoring sensors (if applicable) – No spacers, No hub rings!!

Weighing just a mere 19.5 lbs, The RSe52 wheels will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.

RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.

Every RSe wheel comes with 'RS" enter cap. However, you can choose to utilize OEM Audi or VW center caps as well as the OEM mounting lug bolts, which are not included with the wheel.


Audi cap part #: 4B0 601 170 A
VW cap part #: 3B7 601 171


Compatible with Brembo, Stoptech, and many other big-break kits without the need of wheel spacers/adapters

Note - Sold individually. For a full set, please choose a quantity of 4


  • Size: 18x8.0
  • Offset (E.T.): +45mm
  • PCD (Bolt Pattern): 5-112
  • Center Bore: 57.1mm
  • Weight: 19.0 lbs.

Recommended Tire Size:

  • 225/40R18 (A3, Golf, Jetta)
  • 235/40R18 (B6 Passat/CC)
  • 235/45R18 (2012~up Passat, Beetle)
  • 235/50R18 (Tiguan)

    This valve is for VAG vehicles equipped with the 2.0T FSI  or TFSi engines that have the electronically controlled bypass valves.
    Audi A3 8P RS3 Style Honeycomb Grille - Black Audi A3 8P RS3 Style Honeycomb Grille - Chrome AEM Cold Air Intake System - A3/GTI 2.0T
    List Price: $599.99
    Our Price: $299.99
    Save $300.00!
    List Price: $599.99
    Our Price: $299.99
    Save $300.00!
    List Price: $540.00
    Our Price: $379.00
    Save $161.00!
    Thinking about updating the front end of your Audi A3? This badgeless honeycomb RS3 style grille is the perfect solution! The RS3 hex mesh styling of this grille will make your A3 look sportier and more aggressive.

    Specifications -
    - Grille Color - Gloss Black
    - Frame Color - Gloss Black
    - Direct Fit
    - More cost effective then OEM
    - Filler Plate and Badge Holder Included
    - Does not have cut-outs for front parking sensors

    Applications -
    Vehicle - Audi A3 8P
    Year - 2003, 2004, 2005, 2006, 2007, 2008
    Trim - All
    Thinking about updating the front end of your Audi A3? This badgeless honeycomb RS3 style grille is the perfect solution! The RS3 hex mesh styling of this grille will make your A3 look sportier and more aggressive.

    Specifications -
    - Grille Color - Black
    - Frame Color - Chrome
    - Direct Fit
    - More cost effective then OEM
    - Filler Plate and Badge Holder Included
    - Does not include cut-outs for front parking sensors

    Applications -
    Vehicle - Audi A3 8P
    Year - 2003, 2004, 2005, 2006, 2007, 2008
    Trim - All
    AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter.
    Solo Werks S1 Audi A3 (8P) 2WD Coilovers Solo Werks S1 Audi A3 (8P) Quattro Coilovers AWE Audi A3 2.0T FWD Downpipe w/400 Cell Catalytic Converter
    List Price: $599.00
    Our Price: $495.00
    Save $104.00!
    List Price: $599.00
    Our Price: $495.00
    Save $104.00!
    List Price: $549.95
    Our Price: $511.45
    Save $38.50!



    Finally! A finely crafted coilover system that doesn't break the bank!

    With over 25 years of suspension experience, the Solo Werks engineers have made a coilover system that performs well at an affordable price.
    All Solo Werks products have been designed to meet and/or exceed OEM specifications and standards.

    In the case of of the Solo S1 Coilover system, these kits are designed for the driving enthusiast that is looking for a comfortable yet sporty ride at a lowered level in the spirit of an OEM Sport Suspension - with adjustable height.

    These kits are a perfect replacement for your worn and tired OEM suspension or that aged sport kit.

    Solo S1 Coilover systems utilize a category leading heavy gold zinc plated coilover strut body to provide a long lasting adjustable experience for customers.

    All of the aluminum adjustable spring perches and accessories are precision machined and silver anodized.

    Inside the sport dampers are tuned to give you the best balance between comfort and handling anywhere within the specified lowering range for each system.

    The tuning of the Solo Werks dampers greatly reduce:

    Body roll
    Dive under braking
    Squat under acceleration

    All while retaining ride comfort. This is achieved by increasing the low speed power of the sport dampers from standard OEM settings and keeping the high speed power of the dampers as close to OEM settings as possible.


    Product Features -
    • Heavy gold galvanized Housings for superb corrosion resistance
    • New progressive elastomer bumpstops
    • Silver spring perches - double lock ring design
    • Platform Specific Spring Rates and Matched Valving
    • Front 35-65mm (1.4-2.5") Lowering Range
    • Rear 35-70mm (1.4-2.75") Lowering Range
    • Includes shortened Sway Bar End links!
    • 3 year Limited Warranty
    Each Kit Includes -
    • 2 Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches
    • 2 Front Springs+2 Helper springs
    • 2 Rear Dampers
    • 2 Front Swaybar End Links
    • 2 Rear Adjustable Perches
    • 2 Coilover Spanner Wrenches
    • 2 Coilover Spanner Wrenches
    • 1oz. Bottle Boeshield T-9 Lubricant/Protectant

    Height Adjustment - Yes
    Dampening Adjustment - No

    Applications -

    Vehicle - Audi A3 8P
    Year - 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    Engine - ALL
    Drivetrain - 2WD

    Height Adjustment -
    Front 35-65mm (1.4-2.5") Lowering Range
    Rear 35-70mm (1.4-2.75") Lowering Range




    Finally! A finely crafted coilover system that doesn't break the bank!

    With over 25 years of suspension experience, the Solo Werks engineers have made a coilover system that performs well at an affordable price.
    All Solo Werks products have been designed to meet and/or exceed OEM specifications and standards.

    In the case of of the Solo S1 Coilover system, these kits are designed for the driving enthusiast that is looking for a comfortable yet sporty ride at a lowered level in the spirit of an OEM Sport Suspension - with adjustable height.

    These kits are a perfect replacement for your worn and tired OEM suspension or that aged sport kit.

    Solo S1 Coilover systems utilize a category leading heavy gold zinc plated coilover strut body to provide a long lasting adjustable experience for customers.

    All of the aluminum adjustable spring perches and accessories are precision machined and silver anodized.

    Inside the sport dampers are tuned to give you the best balance between comfort and handling anywhere within the specified lowering range for each system.

    The tuning of the Solo Werks dampers greatly reduce:

    Body roll
    Dive under braking
    Squat under acceleration

    All while retaining ride comfort. This is achieved by increasing the low speed power of the sport dampers from standard OEM settings and keeping the high speed power of the dampers as close to OEM settings as possible.


    Product Features -
    • Heavy gold galvanized Housings for superb corrosion resistance
    • New progressive elastomer bumpstops
    • Silver spring perches - double lock ring design
    • Platform Specific Spring Rates and Matched Valving
    • Front 35-65mm (1.4-2.5") Lowering Range
    • Rear 35-70mm (1.4-2.75") Lowering Range
    • Includes shortened Sway Bar End links!
    • 3 year Limited Warranty
    Each Kit Includes -
    • 2 Front Threaded Coilover Dampers -Heavy Gold Zinc Plated with dual locking ring spring perches
    • 2 Front Springs+2 Helper springs
    • 2 Rear Dampers
    • 2 Front Swaybar End Links
    • 2 Rear Adjustable Perches
    • 2 Coilover Spanner Wrenches
    • 2 Coilover Spanner Wrenches
    • 1oz. Bottle Boeshield T-9 Lubricant/Protectant

    Height Adjustment - Yes
    Dampening Adjustment - No

    Applications -

    Vehicle - Audi A3 8P
    Year - 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    Engine - ALL
    Drivetrain - AWD Quattro

    Height Adjustment -
    Front 35-65mm (1.4-2.5") Lowering Range
    Rear 35-70mm (1.4-2.75") Lowering Range

    AWE downpipes features an integrated resonator to keep the exhaust sound volume civilized even with the elimination of the very restrictive factory converters.
    Neuspeed Exhaust System for 2010+ Audi A3 TDI AWE Audi A3 8P 2.0T C/C/B Carbon Fiber Intake H&R Audi Touring Cup Kit
    List Price: $699.95
    Our Price: $556.46
    Save $143.49!
    Our Price: $593.95
    List Price: $895.00
    Our Price: $652.00
    Save $243.00!

    With over 35+ years experience, Neuspeed performance products have been used on the street and track with the best results in the industry. 

    Neuspeed's latest generation of exhausts uses aerospace quality T304 stainless 70mm tubing for maximum flow and power. Low restriction mufflers and resonators are carefully designed to reduce weight and to produce an agressive exhaust note. Mandrel bends, precise fit flanges, mounting hangers, gasket(s) and hardware are standard on every Neuspeed system.

    NEUSPEED Exhaust Rated #1 by Installers as having the best fit, quality and performance!


    Notes:

    • Fits: 2010-UP Audi A3 TDI
    • 70mm pipe
    • 90mm polished slash-cut tip
    • Designed and engineered Camarillo, California
    • Limited 2 year warranty to the original purchaser
    • Actual parts shown in photo
    Extensive research & development was spent to ensure that the AWE C|C|B (Cold Cone Box) Intake kit was the most complete, best engineered solution available. Touring Cup Kits are H&R’s most popular spring and shock system. This kit is perfectly suited for those who desire lowering, improved ride comfort, and performance.